bestreviewtech 
Best results for 5/8 drill
Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” – 1” by 1/16th Increment
IRWIN 91140 5/8-Inch Silver and Deming Drill Bit, Pack of 1
$15.30
$17.75
Amazon.com
Last update was on: January 19, 2025 8:25 am
- N/A
- Imported
- 82˚ point for fast, smooth drilling in wood
- Hole in flute for easy wire pulling through walls, ceilings and floors
- 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12" length bits
- Premium high carbon steel construction for extended drilling life in wood
IRWIN 1890713 Straight Shank Installer Drill Bit for Wood, 18-Inch by 5/8-Inch
$6.49
$8.83
Amazon.com
Last update was on: January 19, 2025 8:25 am
- 1.Cutting edge is made of Top-class HSS (High Speed Steel).
- 2.Through special heat treatment, the cutting edge is sharp with high intensity.
- 3.Good cutting effect of ferrous and non-ferrous metals, be able to process stainless steel plates below 3mm
- 4.Applicable to Togu Door Viewers whose brass pipe diameters are 9/16"(14mm) and 5/8"(16mm) such as TG-2614 NG/YG series, TG-2814 NG/YG series, TG-3016 NG/YG and TG 1612-3016 series.
Togu DB-02 5/8" (16mm) High Speed Steel Drill Bit
Irwin 3041002 Speedbor Max 5/8-Inch by 6-Inch Self Feeding Spade Bit
DEWALT DW1576 5/8-Inch by 6-Inch Spade Drill Bit
$28.99
$32.47
Amazon.com
Last update was on: January 19, 2025 8:25 am
- Optimized brazing and hardening process for long life
- 15 percent faster (compared to S4L)
- Bosch-made carbide tip is tougher and more durable under heavy loads
- Proprietary Bosch hardening process results in more holes per bit
- Ideal for anchoring and through-hole applications in concrete
Bosch HC2108 5/8 In. x 24 In. SDS-plus Bulldog Rotary Hammer Bit
$19.99
$23.39
Amazon.com
Last update was on: January 19, 2025 8:25 am
- High Quality Material - High Speed Steel M2 Black and Gold, resists corrosion, ensures outstanding durability, sharpness and capability, reduces the friction and runs cooler.
- Black and Gold Oxide Finish - Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant than the regular black surface.
- 135-degree & Split Point - Increases cutting speed with self-centering and prevents walking, clears chips and particles faster. The split point tip can increase the wear resistance. 135-degree penetrates hard material without a pilot hole and produces small chips to reduce clogging.
COMOWARE Reduced-Shank Drill Bit- HSS M2 5/8” Silver and Deming Industrial Drill Bit, Black and Gold Oxide Finish, 135 degree split point, ideal for the most handle, with storage case
$22.07
$31.78
Amazon.com
Last update was on: January 19, 2025 8:25 am
- Heavy Duty BlackGold Silver & Deming drills have superior strength and durability than standard S&D Drills
- BlackGold surface treatment holds lubricant for smoother, longer drilling. Drill faster and penetrate more accurately due to 118* split point.
- 1/2" Flatted Reduced Shank for use in portable drills or drill presses where max chuck capacity is 1/2"
- Ideal for drilling steel, steel plate, stainless steel, cast iron, titanium, nimonic alloys, manganese, and other tough materials
Champion Cutting Tool BlackGold XG12-5/8 Silver & Deming1/2" Shank Drill: MADE IN USA
$11.10
$13.43
Amazon.com
Last update was on: January 19, 2025 8:25 am
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Drill America 5/8" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
$56.09
$74.60
Amazon.com
Last update was on: January 19, 2025 8:25 am
- High Speed Steel for general purpose drilling in a variety of materials
- Tapered Construction or alignment reamer with 1/2 inch 3-flatted shank with 4-1/2 inches of flute length
- 1/2-Inch diameter shank
- Made in the U.S.A.
- Alignment reamer for enlarging a hole
Triumph Twist Drill Co. 072283 5/8 Diameter TCR High Speed Steel Drill, Black and Bronze Oxide Coated, 1-Pack
$25.95
$29.58
Amazon.com
Last update was on: January 19, 2025 8:25 am
- 1/2" shank Silver & Demming set allows large bits to be used with 1/2" chuck
- Sizes: 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1". Length on all bits is 6"
- Heat treated High Speed Steel
- Includes hinged wood storage case with steel latches
- Same set sold as "Brand name" for over $120 !
Reduced Shank Drill Bit Set Silver & Deming 9/16-1" 8-pc
$14.99
$18.29
Amazon.com
Last update was on: January 19, 2025 8:25 am
- Diamond core drill bit adapter for threaded core drill bits hole saw, 3/8" triangle shank to 5/8" 11 threaded male
- Connects to core bits with 5/8" 11 threaded female arbor, and changes to connector to 3/8" triangle
- High quality hardened alloy
- Adapter for Drilling and Grinding Concrete, Glass, Granite, Stones
- Overall length: 2 1/2", Shank length: 1 1/2"
Stadea ADC105K Core Drill Bit Adapter for Threaded Diamond Hole Saw Core Drill Bit – 3/8" Triangle to 5/8" 11 Male
$10.47
$13.09
Amazon.com
Last update was on: January 19, 2025 8:25 am
- Razor sharp serrated edge for fast and flawless cutting
- Quality Forged Construction for extended life
- Ultra Sharp Spur to ensure an accurate starting hole
- Steep Angled Cutting Edges – produce holes that are smooth and flat, and create “chisel-like" curls for fast, clean chip removal.
Freud Precision Shear Serrated Edge Forstner Drill Bit 5/8-Inch by 5/16-Inch Shank (PB-004)
$4.39
$5.79
Amazon.com
Last update was on: January 19, 2025 8:25 am
- Optimized brazing and hardening process for long life
- 15 percent faster (compared to S4L)
- Bosch-made carbide tip is tougher and more durable under heavy loads
- Proprietary Bosch hardening process results in more holes per bit
- Ideal for anchoring and through-hole applications in concrete
