Best 75 Watt Home Stereo Amp
Deal Score0
Deal Score0
Best results for 75 watt home stereo amp
TDA7498E 2 Channel Stereo Audio Amplifier Receiver Mini Hi-Fi Class D Integrated Amp for Home Speakers 160W x 2 + 24V Power Supply
$183.43
$227.45
Last update was on: December 27, 2024 7:05 am
- POWER YOUR SOUND SYSTEM: 2 Channels rated at 55 watts into 8 ohms. 75 watts RMS per channel @ 4 ohms. Bridge Output: 160 Watts @ 8 ohms. Rack mountable (rack ears included).
- HIGHLIGHTS: 5-Way Binding Posts. A/B Speaker selector. Auto Signal Sensing Power On. Dual Auto-Switching Inputs. Independent level and balance controls. Rear mounted treble and bass controls. Front panel diagnostic LEDS.
- AUTOMATICALLY KNOWS WHEN TO TURN ON: This amplifier is audio sensing, meaning it automatically turns on when you start your system.
AudioSource Analog Amplifier, Stereo Power A Amplifier AMP102VS for Home Sound Systems
Kenwood KSC-SW11 Compact Powered Enclosed Subwoofer for CAR
$329.99
$379.49
Last update was on: December 27, 2024 7:05 am
- Make the most of your new 4K Ultra HD TV. This stereo receiver delivers exceptional brightness, contrast and color leveraging industry leading hlg (hybrid log-gamma), HDR (high dynamic range), BT. 2020, wide Color gamut and 4: 4: 4 pure color sub-sampling to impress even the most discerning viewers. Experience 7 amplifiers (165W per channel) driving amazing power and immersive sound across any room. Upgrade from 5 Channel to 5. 2. 2, 7. 1 or 2. 1 (zone 2) arrangement for a lifelike sound experience
Denon AVR-S740H Receiver, 7.2 Channel 4K Ultra HD for Unmatched Realism, 3D Audio, Dolby Surround Sound (Atmos, DTS/Virtual), Stream Music with Alexa Control, HEOS Wireless Speaker Expansion Built In
$35.95
$50.33
Last update was on: December 27, 2024 7:05 am
- 100W Subwoofer Amplifier Board
- Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz
- Operating voltage range: DC 12-24V(maximum voltage is no more than 24V)
- built-in TPA3116 amplifier chip
- This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.
- DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output
AOSHIKE DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board DIY (Bluetooth Amp with Case)
$230.11
$324.46
Last update was on: December 27, 2024 7:05 am
- 75 W/Channel (8 Ohms, 1 kHz, 0.08% THD, 2 Channels Driven, FTC)
- Three-Stage Inverted Darlington Circuitry to Reduce Distortion
- Delivers Multi-Zone Audio with Selected Onkyo A/V Receivers. Damping Factor : 60 (Front, 1 kHz, 8 Ohms)
- Daisy-Chain with Additional M-5010s for Bi-Amping or Multi-Zone Audio
- Impedance Selector Switch (4-8 Ohms and 8-16 Ohms).Signal-to-Noise Ratio:110 dB (Line, IHF-A)
Onkyo M-5010 2-Channel Amplifier (Black)
Last update was on: December 27, 2024 7:05 am
- 2x75 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your home theater acoustic surround sound system. Gives you 2x75 watts peak power which can be used for subwoofer speakers w/ 4-8 ohms impedance, enjoy high quality music and movie
- MULTIPLE SOURCES: This small personal portable digital amp box lets you connect external audio sources such as tuner, CD DVD player, tape deck, camcorder, VCR to the 3.5mm RCA (L/R) LINE input and enjoy enhanced amplified acoustic audio reproduction
Home Audio Power Amplifier System – 2X75W Mini Portable Dual Channel Surround Sound Stereo Receiver Box w/ LED – For Amplified Subwoofer Speakers, CD DVD Player, Theater via 3.5mm RCA – Pyle PCA3
$69.99
$97.99
Last update was on: December 27, 2024 7:05 am
- Perfectly suited for your desktop or a smaller space in your home or office, digital amplifier is easy to connect to your audio system with no software to install or settings to change
- 100W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), comes with 24V power supply, can drive 280watts(8 ohm), 320watts(4 ohm) speakers
- Simple compact design but practical and powerful
- No pop, no audible noise, dead silent when nothing is playing through it
2 Channel Stereo Audio Amplifier Receiver Mini Hi-Fi Class D Integrated Amp 2.0CH for Home Speakers 100W x 2 with Bass and Treble Control TPA3116(with Power Supply) – Fosi Audio TB10A
$339.00
$450.87
Last update was on: December 27, 2024 7:05 am
- Class D amp with Crown's ultra-efficient Drive Core technology weighs less than 11 lb. (5 kg)
- Higher DSP capabilities: More control
- has band pass filter per channel
- Increased lighting functionality
- turn off all LED indicators except clip and thermal to reduce distraction in dark venues
- Selectable input sensitivity
Crown Power Amplifier, 3.50 x 7.70 x 19.00 inches (XLS1002)
$15.99
$23.35
Last update was on: December 27, 2024 7:05 am
- 100W Subwoofer Amplifier Board
- Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz
- Operating voltage range: DC 12-24V(maximum voltage is no more than 24V)
- built-in TPA3116 amplifier chip
- This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.
- DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output
AOSHIKE TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output Digital Small Power Amplifier Board Video Audio Accessories
$59.95
$67.74
Last update was on: December 27, 2024 7:05 am
- IMPORTANT: The MB42 is a passive speaker and needs to be used with an amplifier or receiver. IT CANNOT BE CONNECTED DIRECTLY TO A TURNTABLE!
- Balanced woven carbon fiber woofer for enhanced transient and impactful bass. High performance silk dome tweeter for smooth treble and accurate imaging
- Ported enclosure delivers extended bass response with low distortion
- Neutral and accurate sound signature with excellent vocal clarity
Micca MB42 Bookshelf Speakers, Passive, Not For Turntable, Needs Amplifier or Receiver, 4-Inch Carbon Fiber Woofer and Silk Dome Tweeter (Black, Pair)
Rockford Fosgate R150X2 Prime 2-Channel Amplifier
$179.99
$221.39
Last update was on: December 27, 2024 7:05 am
- POWER YOUR SOUND SYSTEM: 2 channels rated at 50 watts into 8 ohms. 75 watts per channel into 4 ohms. 160 watts bridged mono at 8 ohms.
- HIGHLIGHTS: Rear mounted treble and bass controls. High efficiency class D topologies. Black anodized brushed aluminum faceplate. Bridgeable outputs. OTP Protection. OCP Protection. LED status indicator lights. Manual, auto, or triggered on/off. Rack mountable (Rack ears included). Stereo line outputs.
AudioSource Digital Amplifier, 2 Channel Stereo Power D Amplifier AD1002 for Home Sound Systems
$23.99
$27.83
Last update was on: December 27, 2024 7:05 am
- 50W+50W DUAL CHANNEL: F900 bluetooth receiver amplifier provides 50W+50W dual channel stereo output with the upgraded chip TPA3116. Impedance: 4~8 Ohm.
- THREE INPUT OPTIONAL: Supporting AUX/ USB/ Bluetooth input. But the amp module can be searched and connected via Bluetooth when unplugging audio input line. Insert audio input line, then it will auto switch to wired input mode, Bluetooth function will be lost.
F900 Red/Gold Bluetooth Amplifier with Adapter 5A 12V DC, 50W + 50W Mini Amplifier Wireless Audio 12V DC AMP 100W 2 Channel (Blue (No Adapter))
Last update was on: December 27, 2024 7:05 am
- 300W high power Bluetooth 4.0 digital amplifier can offer 150W for subwoofer and 75W for each channel
- Bluetooth 4.0 high-speed and stable signal transfer
- enjoy your music wirelessly
- Sound is analytical and clear with balanced tri-frequency and no background noise
- With treble / bass / volume independent control
- Standard RCA & Banana jacks