bestreviewtech 
Best results for tungsten carbide bit dremel
Carbide Burr Set JESTUOUS 1/8 Shank Diameter Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit for Die Grinder Rotary Drill Tool 20pcs
$11.56
$15.14
Amazon.com
Last update was on: January 19, 2025 2:21 pm
- LONG WORKING LIFE: Lasts long working life, packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.
- CARBIDE DIE GRINDER BITS Material: Tungsten Carbide Use: Rotary Burr. Total length 45-50mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).
- HIGH PRODUCTIVITY: Processing efficiency than the manual file to improve of times, than with a small handle wheel to improve nearly ten times.
10pcs 1/8" Double Cut Tungsten Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool for Grinder Drill, DIY Wood-working Carving, Metal Polishing, Engraving, Drilling
$4.11
$5.30
Amazon.com
Last update was on: January 19, 2025 2:21 pm
- Use on Hardened steel, fired ceramics and other hard materials
- 1/8" Maximum cutting head
- 1/8" Shank
- Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking
- For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit
- Secure objects to a stable surface while working
Dremel 9904 Tungsten Carbide Cutter
Dremel 9931 Structured Tooth Tungsten Carbide Cutter
$8.99
$10.97
Amazon.com
Last update was on: January 19, 2025 2:21 pm
- The product is 1/8 Inch Diameter, Tungsten Carbide Cutter
- Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking
- Secure objects to a stable surface while working
- Use the sides of the cutter (rather than the tip) for effective cutting the tip cuts poorly and can break under pressure
- Use higher speeds for hard woods slower speeds for metals and very slow speeds for plastics
Dremel 9910 Tungsten Carbide Cutter
$25.00
$27.75
Amazon.com
Last update was on: January 19, 2025 2:21 pm
- Cutting Diameter=1/4"(6mm),Shank Diameter=6mm(approx:1/4''),OAL=64mm
- Material:Solid tungsten carbide,long tool life.good concentricity and consistency at surface processing
- Suitable for process Copper,Aluminum,Alloy,Iron,Marble,Jade,Steel,Glass,Wood and Plaster etc,High Performance.
- Used in the parts bevel edge,inverted round and trench processing,the clean-up casting.
- Package:1 Pack of 10 Pieces
Wokesi 10Pcs,1/4"Cutting Diameter,1/4"(6mm)Shank Diameter,Solid Tungsten Carbide File Cutter Taper Points Burrs Grinding Head Fit Dremel Bits Endmills for Rotary Tools (1/4”(6mm))
Dremel 9901 Tungsten Carbide Cutter
Amazon.com
Last update was on: January 19, 2025 2:21 pm
- 【Quantity】10 pieces Double Cut Solid Carbide Rotary Burr Set, 3mm(0.118) inch shank , fits dremel and most small rotary tools
- 【Durable】 Made of heat-treated durable double cut carbide that lasts long working life, packed with nice plastic case for safety storage and protection
- 【Versatile】Excellent for fine detail work,widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding,ect
YUFUTOL Carbide Burr Set – 10pcs Double Cut Solid Carbide Rotary Burrs 3mm(0.118”) Shank Fits Die Grinder Drill for Woodworking,drilling Metal Carving Engraving Polishing
YXGOOD 10 Pieces Tungsten Carbide Double Cut Rotary Burr Set with 3 mm (1/8 Inch) Shank and 6 mm (1/4 Inch) Head Size
Dremel 9903 Tungsten Carbide Cutter
Amazon.com
Last update was on: January 19, 2025 2:21 pm
- 【Quantity】20 pcs Solid Carbide Rotary Burr Set, 0.118 inch shank(3mm) ,approximate 1/8 inch, fits dremel and most small rotary tools
- 【Durable】Whole Piece made of heat-treated solid tungsten carbide that lasts long working life, sharp and sturdy
- 【Target】Suitable for all skill level | this is a essential kit for woodworkers & enthusiasts who cleans up welds or works with metal frequently, easy to grasp and use, safe and reliable
YUFUTOL 20pcs Solid Carbide Burr Set 0.118‘’（3mm）shank Tungsten Carbide Rotary Files Burrs with 3mm Cutting Head diameter Fits Most Rotary Drill Die Grinder for Woodworking,Engraving,Drilling,Carving
Atoplee 10pcs 1/8 Inch Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Rotary Tool Fits Woodworking Drilling Carving Engraving
$5.00
$6.50
Amazon.com
Last update was on: January 19, 2025 2:21 pm
- The product is 1/8" Diameter Tungsten Carbide Cutter
- Use for shaping, smoothing and material removal
- For use on hardened steel, stainless steel, cast iron, ceramics, hardwoods and other hard materials
- Do not run in excess of 30,000 RPM
Dremel 9906 Tungsten Carbide Cutter
$8.79
$10.28
Amazon.com
Last update was on: January 19, 2025 2:21 pm
- The product is 5/16" Tung Carb Cutter
- Teeth made of tungsten carbide, the hardest material next to diamonds
- For fast material removal on fiberglass, wood, plastic, epoxy
- Also great on rubber, laminates, particleboard, soft metals, and ceramic wall tile
Dremel 9933 Structured Tooth Tungsten Carbide Cutter
$13.95
$16.04
Amazon.com
Last update was on: January 19, 2025 2:21 pm
- 【Premium Material】Made of high quality tungsten steel, can be used to process: iron, steel, carbon steel, alloy steel, stainless steel, copper, aluminum and other metals, and marble, jade, bone and other non-metal. Processing hardness up to HRA≥85
- 【High Work Effenciency】The processing efficiency is tens of times higher than the manual file tool, and nearly ten times higher than the small grinding wheel with the handle. Basically the potary burr set can take place of the small grinding wheel with the handle, no dust and pollution are created.
