bestreviewtech 
Best results for 25/64 drill bit
STEELEX PLUS D4522 HSS Brad Point Bit, 25/64"
$23.66
$27.21
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- ● Diameter: 25/64"
- Flute Length: 3-3/4"
- Overall Length: 5-1/8". HSS E HSS Co Cobalt Drill Bits.
- ●M35 Cobalt High Speed Steel For Drilling Steel, Stainless Steel, Hard Metal and Iron..
- ●Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel
- ●135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface
High Speed Steel M35 HSS Cobalt Jobber Length Twist Drill Bits General Purpose HSS Cobalt Drill Bit 135 Deg.Split Point Drilling Steel, Metal, Iron.… (25/64)
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- Titanium Coated: Classic 4241 High Speed Steel construction with Titanium Coating for proven capability and durability.
- Strength & Hardness: Made with HSS 4241 steel, Rock wall Hardness Level HRC 60-62.
- Package & Size: 10 Pieces in a plastic bag, Diameter 25/64 inch, Total length 5-1/8 inch, Working length 3-3/4 inch.
- Professional & DIY Use: For use on metal, wood & plastics, Not For Use On Concrete / Masonry / Stainless Steel. Perfect match for workshop or service vehicles.
DRILLFORCE10-piece 25/64" Round Shank HSS Titanium Coated Twist Drill Bits for Metal … (25/64)
$9.48
$10.90
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
Bosch CO2152 25/64 In. x 5-1/8 In. Cobalt Drill Bit
$6.59
$7.45
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- Pilot Point Tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough
- No-Spin Shank eliminates the frustration of bit spinning in the chuck
- Tapered web provides greater durability to reduce breaking
- Size markings are located above the shank to prevent wearing away
- For drilling in wood, metal, or plastic
- Pilot point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough
DEWALT DW1925 25/64-Inch Gold Ferrous Oxide Pilot Point Twist Drill Bit
$19.99
$21.99
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- Specifications - 1/16, 3/32, 1/8, 5/32, 5/64, 7/64, 9/64, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, 1/2 (inch).
- HIGH QUALITY MATERIAL - High Speed Steel provide extended tool life compared to ordinary drill bits. Durable and strong.
- TWIST DESIGN - 118-degree split point and round straight shanks prevent "Walking", reduce logging, and penetrates hard material without a pilot hole.
WORKPRO Drill Bit Set, 29-piece Titanium Twist Drill Bits Kit, 1/16-inch to 1/2-inch with Durable Metal Case
$29.99
$35.69
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- We have all had those moments when we need just the right size drill bit. Of course we come to find that we don’t have the bit we are looking for. It always seems to work that way. This set comes with 29 precisely ground, different size drill bits to bore into your wood projects. Brad point drill bits make it so much easier and definitely more accurate than with standard twist style drill bits.
- The drill bits are in fractional sizes and 1/64 inch increments to make it even more convenient for woodworking projects. This set includes 29 drill bits that are clearly indexed in fractional sizes to make it easy to choose or find the correct bit when needed.
29 Piece Fractional Inch Brad Point Drill Bit Set With Indexed Storage Case For Easy Drill Bit Identification. Ideal For Woodworkers, Around The Home Or In The Workshop
$11.99
$14.51
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- ✔ 10 PIECE/ SET -- Masonry drill bits 10 PCS per set includes 2 x 5mm (3/16"), 2 x 6mm (1/4"), 2 x 8mm (5/16"), 2 x 10mm (3/8"), 2 x 12mm (1/2") . Please cooling with water and control the speed when drilling, after used please dry and apply oil to delayed service life.
- ✔ UPGRADED TIP -- This Eaninno concrete drill bit set made of hard and durable Cemented Carbide (German Material, assembled in China) with the Thickened Tip, the hardness is higher than the ordinary drill bit.
EANINNO 10 Pieces Masonry Drill Bit Set, German Material Carbide Tip Concrete Drill Bits for Ceramic Tile/Pots Holes/Brick/Porcelain Wall/Glass/Wood, Multipurpose Installer Bit Tool, 5 6 8 10 12 mm
$18.39
$23.54
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- 135-degree split point for improved wear resistance
- Use in machine drilling and in portable drilling equipment
- Steel metal alloys, heat resistant stainless and titanium
- Stubby length provides for easy penetration
- National Aerospace Standard 907, Type C
Forney 20467 Drill Bit HSS 135-Degree Split Point Screw Machine Length Stubby, 25/64-Inch, Black
$12.76
$15.44
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Drill America 25/64" x 12" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
$20.99
$30.65
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to create a hardened heat-resistant alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times compared with an average HSS drill bit.
- NO CENTER PUNCH NEEDED - The 135° quick-cut split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.
Hymnorq 25/64 Inch Dia. x 5.12 Inch Long M35 Cobalt Steel Twist Jobber Drill Bits 5Pcs Pack, 135 Degree Split Point, Extremely Heat Resistant, for Stainless Steel and Cast Iron
$8.38
$11.98
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- Jobber length drills designed for stainless steel, hard steel, wood and plastic, Swift Bore (Registered Trademark)
- Cobalt Steel withstands abrasion and heat generated by hard-to-machine metals
- Precision ground, gold-finished Cobalt Steel retains hardness at high temperatures
- 135-degree split point for fast penetration and accurate self centering
- Diameter: 25/64-inch, Overall Length: 5-1/8-inch, Shank: 3/8-inch Reduced Shank
IVY Classic 04125 25/64-Inch Cobalt Steel Drill Bit, 135-Degree Split Point, Reduced Shank, 1/Card
$7.93
$11.18
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- Designed for general purpose use in wood, plastic, plaster and soft metal
- High speed steel and duotone finish for fast chip removal and improved cutting life
- 135 Degree Quick cut point requires no center punching, will not walk or wonder
- 3/8" reduced shank
Century Drill & Tool 88225 High Speed Steel Drill Bit, 25/64"
$7.69
$10.15
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel
- Made from industrial grade High-Speed Steel for increased durability. 8% Cobalt alloy is heat and abrasion-resistant
- 135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface
- Bit has a straight shank
Irwin Tools 3016025 Single Cobalt High-Speed Steel Drill Bit with Reduced Shank, 25/64" x 5-1/8"
$7.63
$11.06
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- For drilling in wood, metal and plastic. Each high speed steel bit is hardened and tempered for long life and high performance in tough applications
- 118 Degree point configuration is ideal for general purpose drilling applications
- 3/8-Inch reduced shank allows for drilling larger holes with 3/8-Inch drills
Vermont American 10481 25/64-Inch – 3/8-Inch Shank HSS Drill Bit
$8.99
$12.59
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- ✔ SIZE & REMINDING -- Masonry drill bits set includes 2* 6mm (1/4"), 1* 8mm (5/16"), 1* 10mm (3/8"), 1* 12mm (1/2"). Please cooling with water and control the speed when drilling, then dry the water or apply the oil to prevent rusting after used.
- ✔ UPGRADED TIP -- This Eaninno concrete drill bit set made of hard and durable Cemented Carbide (German Material, assembled in China) with the Thickened Tip, the hardness is higher than the ordinary drill bit.
5 Piece Concrete Drill Bit Set, German Material Carbide Masonry Drill Bits for Concrete/Ceramic Tile/Brick/Wall/Plastic/Wood/Glass, Twist Tip Bit Tool by Eaninno (6 6 8 10 12mm)
Steelex D1034 Deluxe Brad Point Bit Set, 25-Piece
$19.92
$26.10
Amazon.com
Last update was on: January 22, 2025 1:11 pm
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135° split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- 12" overall length for drilling where extra length for reach is required
