bestreviewtech 
Best results for 1/32 drill bit
Smart Fun Precision Pin Vise Model Hand Drill Set Micro Twist Drill Bits Rotary Tools Set of 11
$9.99
$11.09
Amazon.com
Last update was on: January 22, 2025 6:59 am
- Class 3-Jaw Design - Allows you to effortlessly hold round-shank drill bits from 0.8mm to 10mm (0.03-0.39") securely.
- Keyless Design - Tool-free accessory allows you to quickly and easily lock and release.
- Quick Change Universal Fit- For use with any 1/4-inch hex impact driver, snaps easily into the power screwdriver.
- Ideal Drill Conversion Tool - Converts a cordless power screwdriver into a drill or grinder in seconds.
Yakamoz Quick Change 1/4-Inch Hex Shank 0.8-10mm Clamping Capacity Keyless Drill Chuck Screwdriver to Drill Converter Conversion Tool | 3/8-24UNF Mount ¡
$11.80
$17.23
Amazon.com
Last update was on: January 22, 2025 6:59 am
- 7-piece set contains bit ideal for drilling into soft materials
- Includes 1/32-inch, 3/64-inch, 1/16-inch, 5/64-inch, 3/32-inch, 7/64-inch, and 1/8-inch drill bits
- Ideal for moto-tools, cordless tools, and flex shaft tools
- Made of high speed steel
- Convenient storage case included
Dremel 628-01 7 Piece Drill Bit Set
$19.62
$27.47
Amazon.com
Last update was on: January 22, 2025 6:59 am
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Drill America 1/32" Cobalt Drill Bit (Pack of 12), DWDCO Series
$29.98
$39.57
Amazon.com
Last update was on: January 22, 2025 6:59 am
- Easily drills high-quality flat-bottomed and pocket holes
- Features optimized ultra-sharp cutting teeth specifically engineered to cut through hard and soft woods smoothly and efficiently
- Significantly reduces cutting time compared with traditional forstner bits
- Reduced shank fits 3/8" and larger drills and drill presses
- Set includes 1/4" (6.3mm), 3/8" (9.5mm), 1/2" (12.7mm), 5/8" (15.8mm), 3/4" (19.0mm), 7/8" (22.2mm), 1" (25.4mm), 1-3/8" (34.9mm) forstner bits
Irwin Tools 1966892 Marples Wood Drilling Forstner Bit Set (8 Piece)
$10.58
$14.49
Amazon.com
Last update was on: January 22, 2025 6:59 am
- Comes with 11 assorted carving and engraving accessories
- Features 4 engraving cutters and 4 grinding stones
- Includes a diamond wheel point and diamond carving bit
- Packaged in a convenient mini accessory case
- A great addition to your Dremel accessory line-up
Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit
$1.99
$2.95
Amazon.com
Last update was on: January 22, 2025 6:59 am
- High quality brass collets to fit Dremel, other rotary tools, pin vises
- Compatible with most rotary tools used in hardware, hobby, home etc
- Clamping Diameter :1mm/1.6mm/2.3mm/3.2mm(0.04",0.06",0.091",0.126")
- Shank Dia :4.3mm/4.3mm/4.3mm/4.3mm(0.17",0.17",0.17",0.17")Overall Length :17mm/0.67"
- Material :Brass Color :Golden Measurement error Rang: 0.05mm
RHX 2 Set of Brass Collet Fits Dremel Rotary Tools Including 1mm/1.6mm/2.3mm/3.2mm
Amazon.com
Last update was on: January 22, 2025 6:59 am
- Quality HSS M2 ensures sharp and fast execution in any material for clean results
- Premium Heat treated black oxide is durable and withstand heavy duty operation for a long tool life
- Black Oxide Surface Treatment holds up lubricant better for smoother drilling
- 6" OAL & 1/2" Str. shank fits 1/2" drill chuck
- Milled & polished flutes ensure chips move smoothly
- Precision ground with geometry of 118 degree chisel for quick penetration and an accurate start
MaxTool 1-1/32′ Silver and Deming Drill Bit (Prentice); High Speed Steel M2; 118 DEG POINT; 6" OAL 1/2" Reduced Shank Black Oxide; SD02B00R102
$9.90
$11.09
Amazon.com
Last update was on: January 22, 2025 6:59 am
- AS GAME Accessories: Warhammer 40000 40k Games, wargaming, WAR GAMES, D&D, Dungeons and Dragons and another similar figures, sculpture supplies.
- MULTIPURPOSE - You can also use these for jewelry, crafting, whiteboard, blackboard, posting reminders and endless other things!
- SIMPLIFY YOUR LIFE - organize your tools, make-up, jewelry, kitchen, office, school, classroom. There's so many ways to use magnets
MagNetSol Magnets + Drill Bits Combo Pack (100pcs 1/8” x 1/16” Magnets + 2pcs 1/8" Drill Bits)
$13.64
$19.64
Amazon.com
Last update was on: January 22, 2025 6:59 am
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Drill America 1/32" High Speed Steel Polished Drill Bit (Pack of 12), D/AP Series
Amazon.com
Last update was on: January 22, 2025 6:59 am
- New one box set of 30 pieces diamond coated burrs with pointed heads in box set.
- They will fit your hand drill, drill press & your Dremel and Foredom tool with a 1/8" collet. Shank diameter : 3.17mm (1/8 inch)
- diamond drill bits in a coarse grit, for drilling glass, shells, tile and stone.
- Overall length is 40mm (1-5/8 inch)
- They will fit your hand drill, drill press & your Dremel and Foredom tool with a 1/8" collet. Premium type diamond coated in GRIT 80 (coarse). Suitable for glass, marble, rock or jewelry.
TEMO 30pcs 1mm (1/32 inch) Coarse Diamond Coated Burrs Glass Drill Bit Set Grit 80 with 1/8 inch (3mm) Shank fit Dremel and Compatible Rotary Tools
$6.24
$8.74
Amazon.com
Last update was on: January 22, 2025 6:59 am
- N/A
- Imported
- These accessories should be used with a drill with a 3/8" chuck.
- This 10-piece Drill Bit Set contains the most popular range of drill bits - sizes 1/16-in to 1/4-in
- Comes with a handy bit bar that makes storing this set in any toolbox, pocket or kitchen drawer easy
BLACK+DECKER 15557 10-Piece Drill Bit Set
$15.71
$19.64
Amazon.com
Last update was on: January 22, 2025 6:59 am
- IMPACT RATED: Featuring the Bosch Impact Tough bit design so the screwdriving bits are impact rated and provide 2X longer bit life than standard impact drill bits
- ACCURACY: These impact bits feature engineered no-skate tips for more accurate starts
- VERSATILE: The Bosch TI9IM drill bit set is designed for heavy-gauge, light gauge metal and hardwood applications, and high-carbon steel
- PRECISION: The impact bits provide effective material removal thanks to the long flute design
Bosch 9-Piece Impact Tough Titanium Drill Bit Set, TI9IM
$11.68
$14.25
Amazon.com
Last update was on: January 22, 2025 6:59 am
- Industry grade HSS Material drill bit set: industry grade High Quality High Speed Steel, High hardness, good wear resistance and durability.
- Super performance: Bostal Drill is one professional OEM Factory for famous brand
- High quality drill bits is prime. Perfect Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics.
- Full ground process and Titanium Surface Coating: Tin coating to enlarge the life of drill bits and longtime antirust.
BOSTAL 60Pcs Drill Bits Set 1/8 1/16 3/64 5/64 3/32 7/64 Professional Twist Drill Bit Set Industry HSS TIN Coated Jobbers Length Mini Micro Drill Perfect Use for Steel Wood Plastic Aluminum Alloy
$16.99
$23.11
Amazon.com
Last update was on: January 22, 2025 6:59 am
- Use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency.
- High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
- Cutting Edge Diameter: 0.8-3.0 mm( 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 3.17 mm)
- Cutting Edge Length: 12mm. Overall Length: 37mm. Quantity: 1set (10 pcs)
DRILLPRO 10Pcs 0.8-3 mm Titanium Coat Carbide End Mill Engraving Bits CNC Rotary Burrs Set Tool PCB Mould Plastic Fiber Carbon Fiber Hardwood, 1/8” Shank
$6.35
$9.21
Amazon.com
Last update was on: January 22, 2025 6:59 am
- The product is 1/32 Inch Engraving Cutter
- A high-speed cutter designed for precision engraving
- Designed for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals. Not for use with hardened materials.
- Compatible with all Dremel rotary tools.
Dremel 108 Engraving Cutter 1/32-inch, 1/8-inch Shank
$10.35
$11.80
Amazon.com
Last update was on: January 22, 2025 6:59 am
- Devotion to consistently providing the highest quality
- Solutions for manufacturers, fabricators, display and cabinet professionals
- U.S.A. Corporate headquarters and warehouse, located in new York
- Commitment to offer the highest consistent quality and innovative products
- Industrial grade
