bestreviewtech Finding your suitable readers for chest freezer kegerator conversion kit is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for chest freezer kegerator conversion kit including detail information and customer reviews. Let’s find out which is your favorite one.
510 reviews analysed
Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit
- DUAL GAUGE REGULATOR: This Kegco 542-2 Commercial Grade Double Gauge Regulator has a y-splitter and two independent shut-off valves that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.
- LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
- INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit includes easy-to-follow instructions and all of the high-quality draft dispense components you’ll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser.
The Standard Double Keg Kegerator Conversion Kit comes with everything you will need to successfully convert your refrigerator or chest freezer into a two product draft beer cooler. This keg tap kit is designed to run two completely separate kegs. Depending upon your refrigerator capacity, you can run 2 full size kegs, 2 pony kegs, 2 6 gallon kegs or any combination you choose. All the draft beer parts are of the highest commercial grade quality which are designed and built to last. Please Note: Beverage Factory is the only Authorized Reseller of Kegco products. Products purchased outside of Beverage Factory are not genuine Kegco parts and will not be covered under Kegco’s 1-year warranty.
Johnson Controls A421ABG-02C A421 Series Electronic Temperature Control with Pre Wired Power Cord, -40 to 212 Degree F Temperature Range
- Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c
- Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
- Replaces the popular A419 Johnson Control model with upgraded technology.
- The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
- In stock – Ships FAST!
The Johnson Control’s A421 digital temperature controller is great for the brewers kegerator or keezer. You can use this to keep your beer or wine at exactly the temperature you like it. Excellent for fermenting lagers as well. The A421 Series controls are single stage, electronic temperature controls with a single-pole, double-throw (SPDT) output relay. The controls feature an adjustable backlit LCD for viewing the temperature and status of other functions, and a three-button touchpad for setup and adjustment. An LED indicates the On/Off status of the output relay. The A421 control is 120 VAC. The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable anti-short cycle delay, and a restricted user adjustment mode. The temperature units can be displayed in °F or °C. The temperature adjustment range is -40 to 212°F or -40 to 100°C. The A421 automatically changes from heating and cooling.
Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)
Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8″ H x 2 1/8″ W x 1 1/2″ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2″W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.
AquaMonica 2PC 3 Feet Universal fridge freezer Refrigerator Thermostat WDF18K Temperature Control 250V/5(4)A 125V/8(6)A
- Product Name : Refrigerator Thermostat
- Model No. : WDF18K
- Power : AC 250V/5(4)A 125V/8(6)A 50/60Hz
- Body Size(Approx.) : 5.5 x 3.5 x 2.3cm/ 2.2″ x 1.4″ x 0.9″(L*W*T)
- Shaft Diameter : 6*4mm/ 0.24″*0.16″
- Cord Length(Approx.) : 90cm/ 35″
- Mounted Hole Dia : 3mm/0.12″
- Mounted Hole Center Dis tance : 5.6cm/2.2″
- Material : Metal, Plastic
- Color : Silver Tone, Gold Tone
- Net Weight : 80g
- Package : 2 x Refrigerator Thermostat
Description: Applicable: Control the temperature of refrigerator, display cabinet, congealer, beverage cooler and similar product. Wiring Instruction: H (6) Connect to the Brown Wire (live wire of power); L (3) Connect to the Gray Wire (live wire of light); C (4) Connect to the White Wire (live wire of compressor).
110V Thermostat SF-104 Temperature Controller Digital Display Temperature Regulator an Evaporator Fan Controller Defrost Heating Wire Controller
- Small type integrated intelligent control, direct control of 1P or less (including 1P) compressors.
- External sealed transformer output: AC 12V (a transformer can be equipped with a temperature controller)
- The temperature probe: NTC, 2 amended (storage temperature, defrost control) 2 m long (regardless of sign)
- The temperature display range: -45~ 66 oC (-45 ~ 150 oF) Accuracy ± 1oC (± 2 oF)
- The control temperature range: -45 ~ 45 oC (-45 ~ 120 oF) Default: 0oC (32 oF)
Note: The difference between SF-104 and SF-102: SF-102 has the function of light and compressor, SF-104 has the function of compressor, fan and defrosting.If you need SF-102, please check this ASIN: B01L11NVE8
Features
& Small type integrated intelligent control, direct control of 1P or less (including 1P) compressors.
& Temperature Display / Temperature Control / Manual, automatic defrost heater / evaporator fan control / time, temperature terminated defrost / Set Memory / Parameter Lock / self-diagnosis
Technical parameters
1, external sealed transformer output: AC 12V (a transformer can be equipped with a temperature controller)
2, the temperature probe: NTC, 2 amended (storage temperature, defrost control) 2 m long (regardless of sign)
3, the temperature display range: -45~ 66 oC (-45 ~ 150 oF) Accuracy ± 1oC (± 2 oF)
4, the control temperature range: -45 ~ 45 oC (-45 ~ 120 oF) Default: 0oC (32 oF)
5, Dimension: 77x35x60mm, hole size: 71x29mm
6, the working environment temperature: -10 ~ 60 oC (14 ~ 140 oF); relative humidity 20% ~ 90% (no condensation)
7, the relay contact capacity:
& Compressors: normally open 20A/250VAC (a compressor can be used directly over to pick AC contactor)
& Defrost heating wire: normally open 10A/250VAC (1KW load can be used directly over to pick AC contactor)
& Evaporator fan: normally open 5A/250VAC
Packing list:
External transformer X1
Temperature probe X2
we will send the product to you as soon as possible. If you have any questions , please feel free to contact us.
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
Features:
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Specification
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Resolution:0.1°C/0.1°F
Temperature Accuracy:±1°C(-50~70°C)/±1°F(-50~160°F)
Temperature Control Mode:On/Off Control,Heating and Cooling
Input Power:100~240VAC,50Hz/60Hz
Temperature Control Output:Max.10A,100V ~240VAC
Dimension Body:140x68x33mm(5.5×2.7×1.3inch)
Socket:85x42x24mm(3.3×1.7x1inch)
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Ambient Temperature:-30~75°C/-22~167°F
Storage Temperature:-20~60°C
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
Package Content:
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
1xManual
MXBAOHENG SF-102 Electronic Temperature Controller Digital Display Freezer Thermostat 110V
- Temperature display/temperature control
- Manual, automatic shutdown of defrosting
- Time and temperature stop the defrosting
- Lighting control/start-up delay, Key operation restore factory
- Particularly suitable for medium and high temperature air-cooled cabinets
The product usually takes 7–13 business days to arrive to your hand after your order is confirmed
Model: digital thermostat (frozen) SF-102
Measuring temperature display range: -45 ~ 45°C
Measurement accuracy: ±1 °C
Overall dimensions (mm): 77mm (length) x 35mm (width) x 60mm (D)
E1 Lowest temperature: -45°C ~ control the temperature,the factory value of -35°C;
E2 Highest temperature: control temperature~45 °C, the factory value of 20 °C;
E3 Temperature return difference: 1 ~ 10 °C, the factory value of 4 °C;
E4 Delay start-up time from 0 ~ 10minutes,the factory value of 2 minutes;
E5 Warehouse temperature probe calibration: -5 ~ 5 °C, the factory value of 0 °C;
E6 Defrost probe calibration:-5 ~ 5 °C, the factory value of 0 °C;
F1 Defrost time: 1~ 60 minutes, the factory value of 20 minutes;
F2 Defrost interval: 1 ~24 hours, the factory value of 6 hours;
F3 Defrost termination temperature: 0 ~20 °C the factory value of 8 °C
F4 Defrost temperature display: 0 = normal warehouse temperature display, 1 = defrost start temperature display
Double Tap Draft Beer Tower- Stainless Steel- 3" Diameter
Inkbird ITC-106VH AC 100 to 240V PID Temperature Thermostat Controllers F and C K Sensor 25DA SSR Solid State Relay for Sous Vide Home Brewing
- Support reading with Centigrade or Fahrenheit unit
- Dual display window, be able to display measured temperature and set temperature at the same time
- Simplify operational processes and you don’t need to operate more steps if you want to set the definite value
- High accuracy of displaying and controlling. Manual and Auto turning are available
- Power Consumption： Approx. 5VA（100～240VAC）
Specification
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V 50/60Hz
Operating voltage range： 85～110% Rated voltage
Power Consumption： Approx. 5VA（100～240VAC）
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC（＜1000ºC）；1ºC（≥1000ºC）
Period of Sampling： 0.5S
Temperature Compensation： 0-50ºC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g
Environmental Conditions: -10～55ºC（no icy or condensation）, RH 35-85% Humidity
Storage Temperature: -25～65ºC（no icy or condensation）
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals
K-Type Thermocouple Temperature Sensing For Temperature Controller
Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass
25A SSR SOLID STATE RELAY for temperature controller
Specifications:
Load Voltage: 24-380VAC
Load Current: 25A
Input Voltage: DC 3-32V
Pacakge:
1x Inkbird ITC-106VH Controller
1 x 25A SSR
1x Mounting bracket
1 x K sensor
1x Manual
Conclusion
By our suggestions above, we hope that you can found Chest Freezer Kegerator Conversion Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Chest Freezer Kegerator Conversion Kit, eg:
- What are Top 10 Chest Freezer Kegerator Conversion Kit for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Chest Freezer Kegerator Conversion Kit to buy?
- What are Top Rated Chest Freezer Kegerator Conversion Kit to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Chest Freezer Kegerator Conversion Kit?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Chest Freezer Kegerator Conversion Kit.
- Before deciding to buy any Chest Freezer Kegerator Conversion Kit, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Chest Freezer Kegerator Conversion Kit and What you should consider when buying the Chest Freezer Kegerator Conversion Kit and Where to Buy or Purchase the Chest Freezer Kegerator Conversion Kit. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Chest Freezer Kegerator Conversion Kit of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Chest Freezer Kegerator Conversion Kit.
