bestreviewtech 
Best results for drill size 1/4 npt
Century Drill & Tool 93202 1/4-18 NPT Tap and 7/16" Drill Combo Pack
$58.59
$80.27
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
- The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
- The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
Drill America 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set 1/4", 3/8", 1/2", 3/4", 1" and 1-1/4" in Wooden Case
American Tool Exchange Irwin Hanson 1/4” – 18 NPT Tap + 7/16” Drill Bit (AHN-80260)
Century Drill and Tool 95202 Plug Hand Pipe Tap, 1/4-18 NPT
$16.99
$23.28
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- 【PROFESSION & DURABILITY】: Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life
- 【EASY TO CONTROL】: Special design of swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose
- 【EXCELLENT SEALING】: Pre-coated sealant thread reduces air leaking, no need to wrap with Teflon tape
1/4" Swivel Air Plug, SUNGATOR 6-Pack Industrial Swivel Coupler and Plug, 1/4-Inch NPT Male Thread, Air Hose Fittings
Vermont American 20372 1/4-Inch to 18 National Pipe Taper High Carbon Steel Pipe Taps
$123.04
$177.18
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- Classic, reliable design offers proven power, performance, and durability
- Twin-hammer mechanism delivers a maximum torque of 600 foot-pounds
- Adjustable power regulator provides easy control of torque output
- Ergonomic 2-piece design is easy to operate and maintain
- Arrives fully lubricated and ready for use out of the box
- Exclusive impact mechanism
Ingersoll-Rand 231C Super-Duty Air Impact Wrench, 1/2 Inch
$8.49
$9.68
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- 【PROFESSION & DURABILITY】: Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life
- 【EASY TO CONTROL】: Special design of swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose
- 【EXCELLENT SEALING】: Pre-coated sealant thread reduces air leaking, no need to wrap with Teflon tape
Air Tool Fittings, SUNGATOR 1/4" NPT Male Industrial Swivel Plug, 3-Pack 1/4 inch Air Coupler and Plug
$6.02
$7.10
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- M-STYLE: Milton M-style, ColorFit M-style, + red competitor couplers/plugs are all compatible!
- DURABLE: Scratch-resistant steel design in an anodized coating for optimal wear vs. aluminum sleeves
- EASY MATCH: Use color to distinguish between air lines (e.g. high pressure vs. low pressure)
- COLOR: Red to Red matching - (M/Industrial) air coupler/plug fittings, easy push to connect.
- INCLUDES: 1 Male plug, 1 Female plug, + 1 Female coupler (all 1/4" NPT)
ColorFit by Milton Coupler & Plug Kit – (M-Style, Red) – 1/4" NPT, (3-Piece)
$11.18
$13.75
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- 1/4" carbon steel NPT tap and 7/16" HSS drill bit
- Set comes in plastic pouch
- Set contains matching NPT pipe tap and high speed steel drill bit
Drill America 1/4" Carbon Steel NPT Pipe Tap and 7/16" High Speed Steel Drill Bit Set, POU Series
$32.49
$37.69
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shank with square end
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
Drill America 1-1/4"-11-1/2 NPT Pipe Tap, Carbon Steel, DWTPT Series
$8.18
$10.39
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- Each taper tap is used to cut internal threads in pipes
- This taper tap is ideal for pipe fittings
- Taps are tapered at a rate of 3/4 inches per foot
- Nominal size of the tap is that of the pipe fitting being tapped
- 1/4" size with 18 NPT (National Pipe Taper)
Hanson 1903ZR Tap 1/4"-18Npt Taper, for Tap Die Extraction
$16.99
$20.22
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- 【PROFESSION & DURABILITY】: Premium corrosion resistant zinc plated hardened steel construction for a longer using life
- 【EXCELLENT SEALING】: Pre-coated sealant thread reduces air leaking, no need to wrap with Teflon tape
- 【CONNECTOR TYPE】: Industrial type, also known as M-Style(type D), compatible with industrial/M-Style/type D air couplers
- 【PRODUCT SIZE】: 1/4 inch NPT male thread × 1/4 inch body size, interchangeable with most manufacturers
SUNGATOR 1/4-Inch NPT Male Industrial Air Plug, Pneumatic Plugs (25-Pack)
$26.99
$32.66
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- PREMIUM MATERIAL AND DURABILITY: Industrial grade GCr15 bearing steel construction ensures durability and tool longevity
- EXCELLENT CUTTING PERFORMANCE: All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance
- TAPERED TEETH DESIGN: Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading
Best Choice 40-Piece Tap and Die Set – SAE Inch Sizes | Essential Threading Tool with Storage Case
Hanson 1904 Tap
$227.91
$325.91
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- Ideal for rethreading fasteners and fastener holes for auto and machinery repair
- Constructed of high carbon steel for durability
- Puts commonly needed taps, dies, drill bits, and extractors at your fingertips
- Perfect set for the professional craftsman
- Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case
IRWIN Tools Hanson Machine Screw/Fractional/Metric Tap and Hex Die and Drill Bit Deluxe Set, 117 Piece 26377
$4.50
$5.72
Amazon.com
Last update was on: January 22, 2025 1:43 pm
- Cored hex head plug for closing the end of a pipe or fitting
- Male NPT threads for connecting to female threaded pipes
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
