bestreviewtech 
Best results for feather clamp for router table
Taytools 300015 Deluxe 32 Inches Long Router Table Fence 3-1/2 Inches Tall Anodized Aluminum with Feather Board, Bit Guard, Adjustable Stop and Dust Port
$99.99
$114.99
Amazon.com
Last update was on: April 27, 2024 4:15 am
- Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
- The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
- Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
The Hedgehog Spiral Featherboard for Table Saws, Router Tables, and Band Saws
$32.00
$43.52
Amazon.com
Last update was on: April 27, 2024 4:15 am
- PLEASE NOTE: The Hedgehog fits 3/4-inch miter slots (most miter slots are 3/4-inch). Please confirm
- PRO TIP: If your miter slot is a bit wide, remove the miter clamp from the Hedgehog, insert a flat screwdriver into the slot in the clamp, and give it a little twist to make it a bit wider.
- Single knob and pivot point enables fast and easy adjustability with one hand. Loosen knob - spin the Hedgehog into the stock until the fingers flex - tighten knob - keep working. Fast and simple
Milescraft 3403 GRABBER – Pushblock for Table Saws, Router Tables, Band Saws & Jointers
$13.42
$15.97
Amazon.com
Last update was on: April 27, 2024 4:15 am
- Ergonomic, comfort grip handle provides superior control and maximum grip, while keeping your hands angled away from the cutting tool
- Diamond grip rubber bottom is non-marring, TPR material that provides maximum strength to safely hold your work piece in place
- Durable body safely Controls your work piece in all applications
- High visibility Yellow makes it easy to locate in busy shops
Featherboard, DRILLPRO Double Featherboards Feather Loc Board for Table Saws Band Saws Router Tables Fences Tools Miter Gauge Slot Woodworking
$27.21
$32.11
Amazon.com
Last update was on: April 27, 2024 4:15 am
- ❶Featherboard are Made from a HIGH-TECH POLYMER and each one has 13 ANGLED FINGERS that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting.
- ❷4 MITER BARS that fit most standard miter slots (3/8 x 3/4 Inch). Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.
- ❸This unique Featherboard can be quickly QUICKLY and EASILY connected to a miter slot or t-slot.
Bench Dog 10-005 Feather-Loc Single Featherboard for Table Saws and Router Tables
$19.99
$25.39
Amazon.com
Last update was on: April 27, 2024 4:15 am
- Multipurpose featherboard for holding the stock against the guide fence
- Unique miter gauge slot allows quick removal
- Easy set-up feature
- High tech polymer ensures it will maintain its original shape
- Advanced design means no marring to your workpiece
GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
$58.90
$73.63
Amazon.com
Last update was on: April 27, 2024 4:15 am
- 3-Directional Force for Unmatched Control of the Work piece
- Moving-Blade-Guard Hand Protection
- Precise 1/4" Thin Rips
- The Stabilizing Plate provides 250% more stabilizing surface area. Like a featherboard, it keeps wood locked against the fence for a smooth cut – virtually eliminating binding.
- Virtually Eliminates Kickback
- Work with Small Stock Safely on the Table Saw, Router Table, Jointer, & Band Saw. The 1/8″ Leg fits all existing GRR-RIPPER models
Taytools 300016 Deluxe 24 Inches Long Router Table Fence 3-1/2 Inches Tall Anodized Aluminum with Feather Board, Bit Guard, Adjustable Stop and Dust Port
$79.99
$91.99
Amazon.com
Last update was on: April 27, 2024 4:15 am
- Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
- The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
- Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
Kreg PRS2100 Bench Top Router Table
Amazon.com
Last update was on: April 27, 2024 4:15 am
- Industrial-quality fence containing adjustable faces, dust collection, vertical jointing and new cam clamps
- Full-size router insert plate with precision plate levelers and new Level-Loc reducing rings
- Extra-large 16" x 24" MDF table top with an Easy-Slide surface
- Wide stance heavy-duty steel stand for increased stability
- Includes: MDF top, full-size insert place with 3 Level-Loc rings, insert plate levelers, extruded aluminum fence and heavy-duty steel stand
BI-DTOOL Double Featherboards, Adjustable Feather Boards For Table Saw Bandsaw Fence Router Table And Table Saw Fence,Woodworking Router Table Accessories, Bandsaw Accessories, Pack Of 2
$24.49
$28.16
Amazon.com
Last update was on: April 27, 2024 4:15 am
- WIDELY APPLICABLE SIZE: Two widths Miter Bars（3/8 x 3/4 Inch）and t-slot bolts are applicable for most standard miter slots. And associated with wedge-lock hardware and split rail miter bar construction provide maximum hold for bandsaw table, router fence and more.
- RELIABLE MATERIALS: Our product is made from high-tech polymer and have special angled fingers so they can provide steady pressure which produces cleaner cuts with less chance of kickback, chattering or lifting.
Magswitch Table Feather Board Pro Model Pro Table Feather Board Magswitch
$54.58
$74.77
Amazon.com
Last update was on: April 27, 2024 4:15 am
- Pro Table Featherboard Greater Holding Power And Safety, Anywhere You Need It
- Three featherboards in one
- This powerful featherboard adds to your safety and quality of cut
- Fast, easy setup. Precise positioning and tensioning.
- Features 2 powerful on/off Magswitches. Each with 150 lb./67kg of holding force.
- Perfect for infeed / out feed applications. No mitre slot limitation - use anywhere.
Magswitch Universal Featherboard
$50.00
$62.50
Amazon.com
Last update was on: April 27, 2024 4:15 am
- Magwitch Universal Feather board : Works On Both Sides Of The Blade, And Even The Fence
- Low profile and double sided, this is the ultimate feather board from Magwitch
- Works to improve your cutting results on either side of the blade
- The most versatile featherboard ever. Use on any table or fence - no miter slot limitation.
- Features two on/off Magswitches, each with 95lbs of hold force.
- Use for a left or right feed
POWERTEC 71068 T-Track Knobs with 1/4-20 by 1-1/2" Bolts and Washers(Set of 10)
$10.01
$12.11
Amazon.com
Last update was on: April 27, 2024 4:15 am
- Easy use and works with any t-track that accepts standard 1/4-inch bolt heads
- Includes 10 sets of 1/4-inch thru hole knobs, 1/4-20 x 1-1/2-inch bolts and washers
- Great for Jig building and other projects
- Fasteners can be used with material that is less or equal to 1-inch thickness
Bosch Cabinet Style Router Table RA1171
$169.00
$233.22
Amazon.com
Last update was on: April 27, 2024 4:15 am
- SUPPORT: The tall aluminum fence measuring 4-7/8 in. x 25-1/8 in. can handle tall stock with ease. The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and outfeed can be offset for jointing
- PRECISION: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy. For added versatility, it’s pre-drilled to fit a variety of routers
Kreg PRS3010 True-FLEX Featherboard – Single
$18.96
$21.80
Amazon.com
Last update was on: April 27, 2024 4:15 am
- The KREG true-flex feather board gets its name from the careful engineering that went into its design
- Many feather boards on the market apply too much or too little pressure to the work piece resulting in imperfect cuts and less than safe operation
- We've designed each finger of the true-flex feather board to provide consistent and optimum pressure and to stand up to years of use in your workshop
- KREG true-flex feather board comes with wedge-lock hardware which works in T-slots or miter slots on table saws, Router tables, band saws and more.
JessEm Mast-R-Lift II 02120 Router Lift, 9-1/4-Inch by 11-3/4-Inch
POWERTEC 71118 Double-Cut Profile Universal T-Track with Predrilled Mounting Holes(2-Pack), 24"
$17.44
$21.28
Amazon.com
Last update was on: April 27, 2024 4:15 am
- Versatile t-tracks accommodate many bolts
- accommodates 5/16-inch and 1/4-inch t-bolts, and 1/4-inch hex-bolts
- Predrilled, centered mounting holes for convenient, simple installation
- Dimensions: 3/4-inch width, 3/8-inch depth allows for easy and solid embedding without sacrificing surface platform integrity
- Length: 24-inch
- great for use with hold-down Clamps measuring either 5-1/2 x 1-1/8-inch or 3-1/2 x 3/4-inch
ZEROPLAY Miter Bars by MICROJIG (Double Pack)
$29.57
$39.03
Amazon.com
Last update was on: April 27, 2024 4:15 am
- Hassle-free miter bars using One-Touch Calibration
- No slop, side-to-side play or seasonal warping
- Top-down installation for easy and fast mounting to jigs, fixtures and sleds
- Fits standard (3/4" x 3/8") T miter slots, ShopSmith and General miter tracks
- Includes 2 ZEROPLAY miter bars, 2 ZEROPLAY miter stops and cross cut jig plans
- For T-Track Miter Slots Only
KREG Precision Router Table System, Kreg# PRS1045
$547.00
$700.16
Amazon.com
Last update was on: April 27, 2024 4:15 am
- 24" x 32" router table top includes a router insert plate with three molded Level-Loc reducing rings
- 36" T-square style router table fence features a micro-adjust wheel for precise setups
- Outfeed anchor has been redesigned for more usable table space and easier removal
- Multi-purpose steel stand is adjustable from 31" to 39" in height
- Includes Router Table Top with insert plate, Router Table Fence and Multi-Purpose Steel Stand. #148166 KREG 4pc Casters Set not included.
Magswitch STARTER KIT Includes Base, 2 Mag Jig 150, Reversible Feather Board
$68.40
$96.44
Amazon.com
Last update was on: April 27, 2024 4:15 am
- The perfect starter for the Magswitch Workholding System
- The Starter Kit comes complete with the Reversible Featherboard Attachment, the Universal Mounting Base, and two MagJig 150s
- Once you have this tool, get all the other great tool attachments and simply mount to the base as needed
- Reversible featherboard for left or right feeds, with instant on off grip for fast set up, with precise tensioning
