bestreviewtech We spent many hours on research to finding home depot kegerator parts, reading product features, product specifications for this guide. For those of you who wish to the best home depot kegerator parts, you should not miss this article. home depot kegerator parts coming in a variety of types but also different price range. The following is the top 10 home depot kegerator parts by our suggestions
910 reviews analysed
Kegco Standard Tower Kegerator Conversion Kit with 5 lb. Co2 Tank – STCK-5T
- Single Faucet 3″ Diameter Polished Stainless Steel Draft Tower
- Commercial Double Gauge Co2 Regulator & New Aluminum 5lb Co2 Tank
- American “D” System Sankey Lever Handle Tap Coupler
- 5 Feet of 3/16″ ID Beer Line Assembly
- Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits.
This Standard Tower Conversion kit is the perfect solution for those who are converting a compact refrigerator or converting a freezer into a kegerator. This kit comes with brand new, high quality draft beer components and contains everything you will need to successfully convert your compact refrigerator/freezer into a kegerator at great savings. Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits (Other sellers are selling inferior kits that are not Warrantied or Quality Assured Kegco Quality.
Kegco Standard Kegerator Refrigerator Conversion Kit No Tank – EBSCK-NT
- DUAL GAUGE REGULATOR: Easily measure PSI and CO2 volume and adjust CO2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what’s left in the CO2 tank, so you don’t run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and convenient 5-1/4″ length.
- INCLUDES DETAILED INSTRUCTIONS: This conversion kit comes with easy-to-follow instructions and all of the draft dispense components you’ll need to quickly and easily convert your refrigerator into a draft beer kegerator.
This Standard Kegerator Conversion Kit from Kegco gives any do-it-yourself beer lover the tools they need to turn their refrigerator or freezer into a high quality draft beer dispenser. Thanks to a commercial grade dual gauge regulator that allows you to monitor both CO2 pressure in your keg and CO2 volume in your tank, and a lever handle keg coupler that is more durable and long-lasting than a wing handle coupler, you can confidently build your own kegerator with all the exciting features of a professional dispense system. Kegco is with you every step of the way, with detailed instructions included in every kit.
MRbrew Upgraded Beer Faucet, All Commercial 304 Stainless Steel Draft Beer Keg Tap, Beer Tap with Well-Pouring, For American Beer Shanks and Towers
- 【ALL SS 304 CONSTRUCTION】MRbrew beer faucet is in a completely stainless steel construction, solid, less susceptible to wear and tear, will not impart unwanted flavors, body, lever, shaft are all made of ss 304, stronger against air corrosion, brilliantly keep your faucet always as new
- 【HEALTHY COMPOSITIONS】Highly food-grade beer tap is free of harmful chromium compounds, Extremely reduce the harm to the human body during drinking, the MRbrew faucet will be your good threshold to hug a green life
- 【EASILY CLEAN】Faucet structure is simple and reasonable, easy to disassemble and make cleaning regularly, healthy stainless steel provides a second guarantee for keeping your beer faucet clean interior, a good choice if you are in the process of making a bar business
- 【FLEXIBLE HANDLE】MRbrew beer faucet is flexible to operate, not easy to stick, less agitaion and foaming than brass, not easy to drip, good pouring, minimizing beverage loss, drink your beer faster!
- 【100% LIFELONG IUUSES SOLVING FOR YOU】Best in purity—only 304 grade stainless steel MRbrew faucet works well with all standard homebrew and commercial keg systems, please feel free to contact us if you are not satisfied, unconditionally solve for you!
5lb co2 Tank- New Aluminum Cylinder with CGA320 Valve
WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.
Aluminum Carbon Dioxide Cylinder with CGA 320 valve installed. Brushed aluminum body with plain dome (colors available), 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed, high strength aluminum alloy 6061-T6, 5.25 inch diameter, 14.2 inch length, 1.125″ UNF inlet thread.
All cylinders are manufactured in accordance with the U.S. Department of Transportation (DOT) 3AL and Transport Canada (TC) 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.
Keg Coupler, D Type Keg Coupler, Keg Taps For Kegerator, Sankey D Tap With Stainless Steel Probe, Keg Coupler D System With Black Handle & Hose Clamp (D Style)
- ★ Stainless Steel Probe ★ The D system keg coupler’s probe is made of stainless steel that will not wear away over time and your beer will no flavor at all . Keg coupler’s body is made from chrome-plated brass
- ★ Tap For American Kegs Or Sankey Keg ★ The keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on
- ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose
- ★ Easy To Use And Lock ★You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock
- ★ With A Pressure Relief Valve ★ The pressure relief valve of keg tap coupler will automatically open on about 53 psi
Warm Tips:
The type of coupling configuration is the area that must match. Keg couplers are categorized by letters (I.e., S, G, U, D).
Each beer keg requires one and only one of these couplers. American beers typically use a D coupler. European beers typically uses a S coupler
How to check whether the sankey d keg coupler leaks or not？
The best way to check is to spray it with soapy water when it is under pressure and look for bubbles.
There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal.
It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal
Package Includes:
1* Keg Coupler D System
Beer Faucet Beer Line Clamp – PERA Brand Including Draft Beer Faucet, ID 3/16" OD 7/16" Beer Line 5ft Length with Beer Line Connector Hex Nut and Clamp, Spanner Wrench 100% Quality Guarantee
- INCLUDE:Beer Faucet, Beer Line,Beer Line,Clamp,Beer Spanner
- Kegerator Beer Faucet Door Draft Shank With Elbow 1- 2/5″ X 3/16″ Brass Tube
- Stainless Steel Spanner Wrench is Convenient for assemble Beer Tower or Beer keg
- Bars, hotels, restaurants, living rooms and other supplies required to drink a beer ideal
- Quality Guarantee, Any Problem, Money Back or Replacement Guarantee.
Beer Faucet Beer Line Clamp – PERA Brand Including Draft Beer Faucet, ID 3/16″ OD 7/16″ Beer Line 5ft Length with Beer Line Connector Hex Nut and Clamp, Spanner Wrench 100% Quality Guarantee The beer faucet supporting the use of the refrigerator, the refrigerator cooling, mixing valve valve opens. Open the pressure gauge carbon dioxide, carbon dioxide is pressed into the barrels of beer from the tap wine released. Product design skills, furnishings generous, civilized health, ease of use, ready to drink. Bars, hotels, restaurants, living rooms and other supplies required to drink a beer ideal.
Bev Rite CPCCM201 Draft Beer Faucet and Shank Kit Qty 1 Chrome
Standard Beer faucet with 4-1/8 inch shank and black plastic knob. Faucet and shank made of chrome plated brass
Bev Rite CPCCM181 Connector Kit For Beer Line
Includes all four items needed to connect a beer line to your draft beer system. Includes 1 of each for 1 connection: Beer Nut, Washer, Tail piece to connect to 3/16” ID tube and Clamp.
Keg Coupler, D Coupler, US Sankey Keg Coupler, MRbrew Stainless Steel Probe Heavy Duty Keg Coupler with Black Lever Handle
- ????【No Gas Leaks】This keg coupler features a 55-65 PSI pressure relief valve with a food grade silicone O-ring to avoid relief valve leakage of the Keg coupler. The keg coupler meeting all kinds of high pressure beer that needs you, this is definitely the best gift for lovers of home brewing.
- ????【Stainless Steel Probe】The d coupler is constructed of a chrome-plated forged brass body with a sanitary stainless steel probe , This solid reliable sankey coupler is capable of withstanding hard conditions of commercial environments stands up to heavy use in demanding commercial environments such has pubs, bars and restaurants.
- ????【Perfectly Beer Line Fitting】This sankey keg coupler came with a fitting for the beer line so you didn’t have to buy it separately, No more wasting time waiting, tap keg now, Cheers!!!!
- ????【Easy to Install】Connect this keg coupler to the keg, simply apply pressure and twist the black lever handle clockwise 1/2 of a turn & anyone can do it, Use this sankey coupler with your kegerator right away, start enjoying, no longer miss any game !!!
- ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to help you solve the problem. This MRbrew US sankey coupler enjoys 45 Days Money-back, 18-month Worry-free Warranty and Friendly Customer Service.
Kegco D4743DT-SS Double Tap SS Draft Beer Kegerator Tower – 3" Diameter
- Kegco Quality 304 Stainless Steel Beer Tower with Two Chrome Faucets
- 3″ Diameter Premium Quality 304 Stainless Steel Column
- Used with Air Cooled Beer Dispensing Systems
- Two Kegco Chrome-Plated Brass Faucets Installed
- Two 5′ Lengths of 3/16″ Clear Beer Tubing with Nozzle and Hex Nut Assemblies
This is a Polished Stainless Steel Single Column, Double Faucet, 3″ Diameter Draft Tower. This tower comes complete with two chrome-plated beer faucets and two separate 5″ lengths of 3/16″ clear beer tubing with nozzle and hex nut assemblies. It will connect to all standard keg couplers.
Conclusion
By our suggestions above, we hope that you can found Home Depot Kegerator Parts for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Home Depot Kegerator Parts, eg:
- What are Top 10 Home Depot Kegerator Parts for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Home Depot Kegerator Parts to buy?
- What are Top Rated Home Depot Kegerator Parts to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Home Depot Kegerator Parts?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Home Depot Kegerator Parts.
- Before deciding to buy any Home Depot Kegerator Parts, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Home Depot Kegerator Parts and What you should consider when buying the Home Depot Kegerator Parts and Where to Buy or Purchase the Home Depot Kegerator Parts. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Home Depot Kegerator Parts of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Home Depot Kegerator Parts.
