Top 10 Kegerator Beer Coupler How It Works

This is a Kegco commercial grade lever Handle keg coupler. The KT85D-L is compatible with all domestic brand kegs. This keg tap works with all American “D” system sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body with a stainless steel probe. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg.

Warm Tips: 
  The type of coupling configuration is the area that must match. Keg couplers are categorized by letters (I.e., S, G, U, D).  
Each beer keg requires one and only one of these couplers. American beers typically use a D coupler. European beers typically uses a S coupler 
 
How to check whether the sankey d keg coupler leaks or not？ 
The best way to check is to spray it with soapy water when it is under pressure and look for bubbles.
There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal.
It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal

Package Includes:  
1* Keg Coupler D System

★ The rubber seal inside is sturdy
★ No leaks at all and installation was very easy on the sanke keg
★ Easily swap between commercial kegs to your homebrew kegs
★ Keg coupler adapter kit includes both a gas and a liquid post

“D” system is the most common system available in the U.S., also known as American Sankey. It is used by all the major breweries.

  How to use the beer keg coupler？
You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock

How to check whether the sankey d keg coupler leaks or not？
The best way to check is to spray it with soapy water when it is under pressure and look for bubbles.
There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal.
It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal

Features:
System: D Keg Coupler
Body Material: 304 Stainless steel
Probe Material: 304 Stainless steel
Handle Color: Black
Handle Style: 304 Stainless steel – Lever
Gas Port: 3/8″ O.D. Barb (To fit 5/16″ I.D. Gas Hose)
Beer Port: 5/8″ Thread (U.S. Beer Industry Standard)
pressure relief valve: pressure relief valve releases at 55 PSI
Short handle is ideal for the smaller diameter 1/6 kegs

Package Includes:  
1* 304 Stainless Steel Keg Coupler

Restore your old beer tower to new with this rebuild kit. The replacement process is easy and will save you money from buying a new tower.

This Standard Kegerator Conversion Kit from Kegco gives any do-it-yourself beer lover the tools they need to turn their refrigerator or freezer into a high quality draft beer dispenser. Thanks to a commercial grade dual gauge regulator that allows you to monitor both CO2 pressure in your keg and CO2 volume in your tank, and a lever handle keg coupler that is more durable and long-lasting than a wing handle coupler, you can confidently build your own kegerator with all the exciting features of a professional dispense system. Kegco is with you every step of the way, with detailed instructions included in every kit.

Bigger isn’t always better. If you’re limited with space inside your fridge, this US Sankey (D System) keg coupler with a short handle may be just what you need to complete your draft beer system.The keg coupler connects your CO2 tank to your keg. The gas line attaches to the side hose nipple, which directs pressurized gas into the keg. This allows the beer to be pushed up out of the keg and through your plastic beer line. Featuring a lever handle that is 1/2-inch shorter than a standard coupler, this item is ideal for slim 1/4 kegs with high walls around the coupler fitting. A half inch might not sound like much, but that’s 20% shorter than a standard coupler, and will make a huge difference depending on the keg you’re tapping. Designed to fit US Sankey (D system) keg valves, this premium coupler will work with the vast majority of North American beers, including Budweiser, Michelob, Miller Lite, Milwaukee’s Best, Coors Light, Killian’s, Sam Adams, Molson, Labatt, and more. Be sure to review our complete keg coupler list to check which system your favorite beer uses. Made of brass with nickel-plating, this keg coupler is durable and simple to install. The blue plastic handle is very easy to operate. For your safety, the coupler features an internal relief device that prevents dangerous pressure build-up that can damage your system. Features: US Sankey (D System) keg coupler. Connects the gas tank, keg, and beer lines to allow for pressurized dispensing. Lever handle that’s ½ inch shorter than standard keg coupler. Ideal for installation in tight spaces or slim 1/4 kegs. Works for majority of North American beers. Made of nickel-plated brass. Internal safety relief device. Easy to install and use. Perfect for home or commercial use. Specs: Fits D System keg taps valves. Dimensions: 6 1/2”W x 3 1/4”H x 2 1/2”D. Handle dimensions: 2”L.

Take a look at our most durable full-size US Sankey coupler! * Lever handles just aren’t as tough as this solid wing handle. Sankey coupler designs do vary and this one is most ideal for slim 1/4 kegs with high walls around the coupler fitting. This is NOT a low profile coupler. * This coupler fits D-System keg tap valves, which means it’s exactly what you need to serve the majority of beers brewed in the United States and Canada. It’ll dispense Budweiser, Michelob, Busch, Miller Lite, Milwaukee’s Best, Coors Light, Killian’s, Sam Adams, Pete’s Wicked, Molson, Labatt, OV, Moosehead and so many more. * Click here for a complete list of keg coupler systems by beer brand. * Specs – Dimensions: 4 1/8″ H x 4 1/8″W x 5 1/2″D.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Kegerator Beer Coupler How It Works, eg:

• What are Top 10 Kegerator Beer Coupler How It Works for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Kegerator Beer Coupler How It Works to buy?
• What are Top Rated Kegerator Beer Coupler How It Works to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Kegerator Beer Coupler How It Works?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Kegerator Beer Coupler How It Works.
• Before deciding to buy any Kegerator Beer Coupler How It Works, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Kegerator Beer Coupler How It Works and What you should consider when buying the Kegerator Beer Coupler How It Works and Where to Buy or Purchase the Kegerator Beer Coupler How It Works. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Kegerator Beer Coupler How It Works of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Kegerator Beer Coupler How It Works.