bestreviewtech 
Best results for replacement planer feed rollers
POWERTEC PL1251 15 Amp 2-Blade Benchtop Thickness Planer For Woodworking, 12-1/2" Portable
$428.99
$544.82
Amazon.com
Last update was on: January 18, 2025 7:06 pm
- This DW735 OEM cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.
- Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.
- Helical insert knife configuration breaks up chips, making dust collection easier.
Byrd Tool woodworking Shelix OEM Size cutterhead for Dewalt planer DW735
$379.00
$454.80
Amazon.com
Last update was on: January 18, 2025 7:06 pm
- Cutterhead diameter is 0.088" (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts.
- C3 carbide cutters lasts an average of 10 times longer per side (4 sides = 40x) than traditional steel knives.
- Spiraled to break up chips for dust collection, shear to give clean cutting action
- True helical cut (slices the wood) which greatly reduces noise and tearout
Byrd Tool Shelix cutterhead for Dewalt planer DW735
Amazon.com
Last update was on: January 18, 2025 7:06 pm
- Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
- Three knife cutter-head delivers 30% longer knife life, fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
- Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
- Maximum depth of cut 1/8 inch, depth capacity 6 inches, width capacity 13 inches
DEWALT DW735X Two-Speed Thickness Planer Package, 13-Inch
$174.48
$249.51
Amazon.com
Last update was on: January 18, 2025 7:06 pm
- Perfect for moving material through cutting tools – smoothly move stock through your bandsaw, planer, table saw, and more
- Adjustable height for incredible versatility – adjusts from 26.5” to 43” high, making it ideal for almost any situation that requires feeding material
- Safe and stable– non-skid leveling feet and a 500lb capacity means it will stand firm for even the toughest jobs
- Galvanized steel ball bearing rollers – for smooth, consistent feeding of material
Adjustable Roller Table Stand HTC HRT-10 Super Duty Conveyor Feed Stand With 5 Ball Bearing Rollers
Amazon.com
Last update was on: January 18, 2025 7:06 pm
- Simple, quick setup and breakdown
- Collapses flat and quick for hassle-free horizontal and vertical storage
- Spring-loaded locking legs activated with handy locking-lever mechanism
- Two levels of height (26-31/32" and 32-9/32") for the utmost in project flexibility
- Solid steel construction insures the ultimate in workstand portability and solidity
- Durable and strong - allows for 440 lb weight capacity
POWERTEC MT4005 Mounting Deluxe Rolling Stand
Powermatic 1791316 209HH, 20-Inch Planer, 5HP 3PH 230/460V, with Byrd Cutterhead
$299.00
$376.74
Amazon.com
Last update was on: January 18, 2025 7:06 pm
- Powerful 15A motor capable of handling the demands of a small shop
- Four column design provides excellent stability for smooth, accurate planing over many years of use
- Quick-change knife system with dual edge disposable knives lets you change knives without difficult to use alignment jigs
- Adjustable infeed and outfeed tables to better support long pieces and reduce snipe
- Reversible dust port allows you to collect chips from the right or left side of planer
Delta Power Tools 22-555 13 In Portable Thickness Planer
$3,039.99
$3,891.19
Amazon.com
Last update was on: January 18, 2025 7:06 pm
- The helical cutterhead on this planer provides smoother cutting and a finer finish than conventional knives, and the 74 four-sided indexable carbide knife inserts do not require adjustment after installing.
- Powerful 3HP TEFC motor controlled by magnetic switch for safety.
- Three V-belts transfer maximum power to the cutterhead.
- Serrated steel infeed roller and smooth steel outfeed roller allow for 1/8-Inch maximum depth of cut and trouble-free operation.
Powermatic 1791213 15HH 3 HP 15-Inch Planer with 230-Volt 1 Phase Byrd Shelix Helical Cutterhead
PROTOCOL Equipment RS-011A Single Roller Stand
$269.88
$361.64
Amazon.com
Last update was on: January 18, 2025 7:06 pm
- Powerful 15 amp motor for superior stock removal
- Two knife, quick change, solid steel cutter, head mounted on ball bearings, assures smooth operation and long life
- High carbon steel, double Edged, Reversible knives for twice the cutting life
- Patented cutter elevation on four precision ground columns for superior cut stability
- Poly V belt cutter head drive with rugged gearbox/chain and SPROCKET feed roller drive for maximum power transfer
PORTER-CABLE PC305TP 12" Thickness Planer
Powermatic 1791315 209HH, 20-Inch Planer, 5HP 1PH 230V, with Byrd Cutterhead
$21.00
$27.72
Amazon.com
Last update was on: January 18, 2025 7:06 pm
- COMPATIBILITY: Delta 22-540 22-547 TP300, Jet 708522 JWP-12-4P, Craftsman 233780 , Harbor Freight Wood Planers
- W6 laminated high-speed steel construction blades stay sharper and last longer than conventional knife materials
- Blade material: M2/SKH51/W12Mo5Cr4V2
- Hardness: HRC 63-65°
- Size and Packed: 12.5"x3/4"x1/16"，2pcs in a Plastic box
Planer Blades Knives 12.5 Inches HSS Replacement for Delta 22-540 22-547 TP300, Jet 708522 JWP-12-4P Craftsman 233780 Harbor Freight Wood Planers 12.5"x3/4"x1/16" Set of 2
$639.95
$806.34
Amazon.com
Last update was on: January 18, 2025 7:06 pm
- If you do any kind of production ripping or milling you know what a big chore it can be feeding by hand especially with longer and wider stock
- For those of you who want to increase production upgrade or add on an extra stock feeder we have a power feeder that will match virtually any apply
- CSA certified meeting CSA C22
Grizzly G4176-HP Power Feeder, 0.25 HP
$2,499.99
$3,124.99
Amazon.com
Last update was on: January 18, 2025 7:06 pm
- 3hp, 1ph, 230-volt motor
- Produces 5000 RPM and 20,000 cuts per minute
- 4-knife cutterhead
- Cast-iron base table and head
- one-piece welded base
- Includes 24-volt magnetic controls, four high-speed steel knives, dust hood, extension rollers, two-speed gearbox, return rollers, knife-setting gauge, and one-piece welded base
